Aquascape LED 3 Watt Bullet Spotlight - 2009-2012 (98927) User Manual

Browse online or download User Manual for Lighting Aquascape LED 3 Watt Bullet Spotlight - 2009-2012 (98927). Aquascape LED 3 Watt Bullet Spotlight - 2009-2012 (98927) Manuel d'utilisation

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
LEGAL WARNINGS
Except as stated in the warranty, there are no other representatives or warranties related to the
product or its use. THE USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR THE USER’S
INTENDED USE, AND THE USER ASSUMES ALL RISKS AND LIABILITIES WHATSOEVER IN CONNECTION
THEREWITH. Seller and manufacturer’s only obligation is to repair and or replacement of submersible
light housing as stated below. ALL IMPLIED WARRANTIES ARE HEREBY EXCLUDED, INCLUDING, BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE. Neither seller nor the manufacturer shall be liable for any injury loss, or damage whether direct,
incidental, or consequential arising out of the use or inability to use the product.
To reduce the risk of electrical shock, all wiring and junction connections should be made per local
codes. Requirements may vary depending on usage and location.
1
YEAR
WARRANTY
1
GARANTIE
DE 1 AN
2
YEAR
WARRANTY
2
GARANTIE
DE 2 ANS
3
YEAR
WARRANTY
3
GARANTIE
DE 3 ANS
1
YEAR
WARRANTY
1
GARANTIE
DE 1 AN
2
YEAR
WARRANTY
2
GARANTIE
DE 2 ANS
3
YEAR
WARRANTY
3
GARANTIE
DE 3 ANS
The 3-Watt 12 Volt LED Bullet Spotlight is war-
ranted against defective materials and work-
manship for a period of 12 months from the date
of purchase by the user. Contact the installer or
place of purchase if the 3-Watt 12 Volt LED Bullet
Spotlight should fail within the warranty period.
Warranty shall be totally null and void in the event
the 3-Watt 12 Volt LED Bullet Spotlight is abused,
misused, or used for a purpose other than for
which the product is intended. No warranty
applies to the light bulb used with the housing.
WARNING
It is recommended whenever working in or near water to have all electrical devices
plugged into a ground fault circuit interrupter (GFCI) that has been installed by a
licensed electrician.
Do not put stake through liner. COVER TO LIGHT MUST BE TIGHT AT ALL TIMES TO PREVENT
ANY LEAKING .
3-Watt 12 Volt LED
Bullet Spotlight
PACKAGE INCLUDES:
3-Watt 12 Volt LED Bullet Spotlight
with 15 ft. cord
• Adjustable plastic light stand and stake.
• Low Voltage Transformer (sold separately)
Installation Instructions
Installing the Light
It is easiest to install and conceal the 3-Watt 12 Volt LED
Bullet Spotlight prior to putting the gravel in the pond
and stream. Find a desirable location for the light(s). We
suggest positioning the light(s) so they are facing away
from the main viewing area. Double-check to make sure
that the lens cover is fastened tightly down. Depending on
the installation, the 3-Watt 12 Volt LED Bullet Spotlight
can be used in or out of water. If being used out of water
attach the light to the stake, if being used in the stream
area the light should be used with the light stand, or
without a stand by tucking the fixture between rocks.
Simply take the cord and plug into the transformer, plug
in transformer and enjoy! The 3-Watt 12 Volt LED Bullet
Spotlight can also be wired directly into a pre-existing
low voltage lighting system. In order to do this, cut off the
plug on the light and splice directly into the low voltage
wire.
Replacing the Light Bulb
Troubleshooting
• Make sure that the plug is inserted all the way into
the transformer. If light is wired into a low voltage
lighting system make sure all of the connections
are sound.
• Make sure that no water has seeped into light
housing unit.
• Check light bulb.
• Bulb life can be greatly increased by setting timer
on transformer, so the light only operates during
the desired times.
1. Make sure all power is shut off to the light before
changing the bulb. The light housing must be
above water to properly service the light bulb.
2. Unscrew the lens cover from the front of the
light housing unit.
3. Remove the LED bulb.
4. Insert the new bulb
5. Screw the lens cover onto the light housing.
Make sure there is no dirt or debris on the
assembly prior to reassembling.
6. Test to make sure light works
7. Position light back into pond.
Replacement Parts
Replacement Bulbs for 3-Watt 12 Volt
LED Bullet Spotlight
#98490 3 LED Replacement Bulb (white)
Made in China
Aquascape, Inc.
St. Charles, IL 60174 • Brampton, ON L6T 5V7
www.aquascapeinc.com
Item #98927.2009
©2012 Aquascape, Inc. • All Worldwide Rights Reserved IDD 09087535-AI 080181
Page view 0
1 2

Summary of Contents

Page 1 - Bullet Spotlight

LEGAL WARNINGSExcept as stated in the warranty, there are no other representatives or warranties related to the product or its use. THE USER SHALL DE

Page 2 - 12 V, 3 watt

AVIS DE NON-RESPONSABILITÉSauf lorsque mentionné dans la garantie, il n’y a aucun autre représentant ou garantie relié à ce produit ou son utilisation

Comments to this Manuals

No comments