Aquascape 210 GPH Statuary (99534) User Manual

Browse online or download User Manual for Pumps Aquascape 210 GPH Statuary (99534). Aquascape 210 GPH Statuary (99534) Manuel d'utilisation

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Adapter
Motor
Impeller
Pump Covers
Pre-Filter
Supports
Congratulations on your purchase of
this submersible pump.
You willnd this pump ideal for use in water gardens,
ponds and to power small ornamental fountains and
statuaries. These pumps are very energy efficient, using
50% less power than conventional pumps. They are
designed to be operated fully submerged. Made with
environmentally friendly materials, they are fish safe.
The pumps are fitted with a pre-filter system to prevent
clogging and wear on the impeller. The motors are epoxy
encapsulated, not oillled and are CSA approved.
Features
PACKAGE INCLUDES:
210 gph Statuary Pump
• Instructions for Use
Statuary Pump
210 gph Installation Instructions
Fully submersible and energy efficient
Powers ornamental fountains and statuary
Prefilter system built in prevents clogging
Fish safe, environmentally friendly materials
REPLACEMENT PARTS
To order replacement parts, contact your local Aquascape™ retailer.
Made in Italy for
Aquascape, Inc.
St. Charles, IL 60174 Brampton,ON, L6T 5V7
www.aquascapeinc.com
Item #99534.052006
SAFETY CONSIDERATIONS
This product must be installed on an electrical circuit protected by a Ground Fault Circuit
Interrupter (GFCI). Refer to your electric supply dealer for details.
If you have any questions or doubts about this product, consult a qualified electrician.
Do not lift the pump by the power cord it is not designed for portable use.
Always disconnect from electrical supply before attempting to service or perform
maintenance procedures.
Troubleshooting
Reduced Flow:
Check pump and impeller for any blockages. It may
be necessary to take the impeller and prefilter out
and clean them.
• Check pipe and plumbing for any kinks or blockages.
Pump is not pumping:
Make sure nothing is blocking the impeller. It may be
necessary to clean pump.
©2006 Aquascape, Inc. All Worldwide Rights Reserved IDD 06044481-ADI B060201
1
YEAR
WARRANTY
1
GARANTIE
DE 1 AN
2
YEAR
WARRANTY
2
GARANTIE
DE 2 ANS
3
YEAR
WARRANTY
3
GARANTIE
DE 3 ANS
1
YEAR
WARRANTY
1
GARANTIE
DE 1 AN
2
YEAR
WARRANTY
2
GARANTIE
DE 2 ANS
3
YEAR
WARRANTY
3
GARANTIE
DE 3 ANS
This 210 gph Statuary Pump #99534 is warranted
against defects in materials or workmanship for a
period of 24 months starting at the date of purchase
by the customer. This is the only warranty applicable
for this product. Our obligation under this warranty
is limited to the repair or replacement of the product
if it fails to operate. Neither Aquascape, Inc. nor
the seller is liable for injury, loss or damage related
to the use of the product. However, this limitation is
not applicable in some states.
The warranty is void if any of the following is found:
1) Abuse of product by the customer.
2) Product connected to an electrical supply other
than specified.
3) Power cord cut to a length of less than three feet.
4) For pumps: (a) sealed motor housing opened;
(b) pump operated dry, with uid supply shut
off and (c) pump used to circulate material other
than fresh water, light oils or other mild liquids at
approximately room temperature.
Installation
1) If a fountain is not required, connect hose
directly to the outlet adapter and secure with
hose clamp.
2) Place pump in pond. If fountain is in use, ensure
fountain head is above water level. The pump
should always be submerged in water and never
run dry.
3) Plug pump cord into grounded outlet. Ensure
cable is protected — keep away from children
and garden hazards.
Maintenance
1) Remove pump from electrical supply.
2) Wash pre-lter in fresh, running water. Never use
chemical detergents when cleaning. Handle lter
sponge material carefully.
3) Remove impeller, inspect and clean in running
water; replace if worn or damaged.
4) Reassemble pump; reconnect to electrical supply.
MAINTENANCE NOTES:
Check cord periodically for sharp bends and correct.
If pump is taken out of service, ush with fresh water and
allow to drain dry prior to storage.
Impeller Cover
Model gph full
open
Cord
Length
gph
@ 2’
gph
@ 4’
Max
Head
Tubing
Size
Watts Size
Code
210 gph 210 6 190 110 4ft. 1/2” 12 S
Pump Performance
Replacement Part Item #
200 gph Impeller 20351
99534 210 GPH Statuary Instructi1 1 5/11/06 2:41:49 PM
Page view 0
1 2

Summary of Contents

Page 1 - Statuary Pump

AdapterMotorImpellerPump CoversPre-FilterSupportsCongratulations on your purchase of this submersible pump. You will find this pump ideal for use in wa

Page 2 - Pompe pour statues

AdaptateurMoteurRotorBoîtier de la pompePré-filtreSupportsFélicitations d’avoir acheté cette pompe submersible. Vous la trouverez idéale pour les jard

Comments to this Manuals

No comments